It Started With A List

Wrote up what was needed to complete the build on a white board in the garage. Quite a few bits left to get on with.

White Board

On Saturday I started on the temporary kitchen worktop. I had some Formica covered marine ply which I cut and laminated to make a nice thick worktop. Then came the job of marking up and cutting out the sink/hob hole. This will later be replaced with something a bit more “bling”


My idea was to stick the same rubber tiles I used on the floor on the worktop. And it didn’t work out too bad and may stay for a while.

In Van

I then made an end panel near the sink which got the rubber treatment too. This will have a double socket and a four gang light switch wired into it.

End Panel

Then it was onto the doors. Cut and edges rounded and all now ready for going away to be painted in a high gloss finish.


I also made a start on a shallow shelf unit above the cooker that will have some small spots fitted in it. I got the boards cut ready to fit to the bed frame and cut, carpeted and fitted a front panel on the bed base.

Quite a productive weekend.

About whatton

Family guy with a motorbike, VW Camper and a camera. Electrical Engineer and compulsive tinkerer. Have been known to tie one on now and again.
This entry was posted in Camper Build, Interior, Kitchen. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s